Synchronizing panel operates on an automatic mains failure system, so that when the main supply is interrupted or system requires more supply for running load then after an adjustable delay period the generator sets starts-up together. After an initial warm-up period the generators are synchronize with each other by means of motorized circuit breakers or contactors onto a common busbar. Next, the load connects to the main distribution box.
The load share units continuously monitor the load and during low demand periods one or two generators will be shut down to save on fuel consumption. As demand rises again the second generator and third generator will be restarted, synchronized and reconnected to the load. When the AMF control unit detects that the main supply has been restored an adjustable observation period is activated before the main supply is reconnected. A cool down period will then follow, after which the generator sets will be shut down.

SYSTEM:

415-440v Volts, 50hz, 3phase, 4wire +E (TPN+E)

FEATURES

Continuous supply of power
Floor standing type
Adequate labels on top
Lowers & fan for air circulation

POWER AND CONTROL WIRING

PVC insulated adequate wire size
Joints with lugs
Fixed with cable tie / button tie

COPPER BUSBAR

Standard rated pure and imported bus bar
Red, Yellow, Blue, Black, Green color paint/color sleeves
Fixed with fiber glass or high quality insulators

MANUFACTURING

MS sheet metal (14 & 16 swg), fabricated in standard size of 2000mm
including 100mm panel

FINISHING PAINT

High quality corrosion resistant powder paint
RAL 7032 for housing
Black for pedestal
Other colors and undercoat paint are also available on request

PROTECTION CLASS

IP 54